Smart ZigBee Energy Meter Bidirectional 1, 2 Channel with 80A Current Transformer Clamp App Monitor Power Need Gateway
Smart ZigBee Energy Meter Bidirectional 1, 2 Channel with 80A Current Transformer Clamp App Monitor Power Need Gateway
SPECIFICATIONS
Ambient Temperature Range: -10 - 50 degree
App name: Tuya Smart, Smart Life
Brand Name: MatSee Plus
Camera Equipped: No
Certification: CE,RoHS
Channel Option: 1 or 2 Channels
Choice: yes
Communication method: Zigbee
Compatibility: All Compatible
Direction: Bidirectional
High-concerned chemical: None
Measure range: 0.2-80A
Origin: Mainland China
State of Assembly: Ready-to-Go
Voltage: 100-240V
Wireless Frequency: 2.4Ghz
Wireless Function: Yes
Wireless Protocol: ZigBee
requirement: Tuya Gateway
semi_Choice: yes
Q: Why can't my device connect to 2.4G WiFi?
A: This is a ZigBee device, it can't connect WIFI signal directly, but require a Tuya ZigBee gateway as hub to work, please make sure you have a Tuya ZigBee gateway to work with this item.
Q: Is it ZigBee 3.0 standard Item?
A: No. It's Tuya ZigBee device, not ZigBee 3.0. so it can only work Tuya ZigBee Gateway.
Q: Is this device compatible with HomeAssistant?
A: No, it's not compatible. Please use the Tuya Smart or Smart Life APP.
Q: Is this device compatible with Zigbee2MQTT?
A: Sure.. If you have any question about how to figure it, please be free to contact with customer service, we will make guide.
Please Note :This device can not connect directly to 2.4G WiFi.
It requires a Tuya ZigBee Gateway to work. If you don't have this Gateway , please click below any picture to buy one .
App can display Channel A and B Real-time power, current, voltage for Forward and Reverse direction clrealy
The meter is allow to do calibration
2 Channels For Reverse and Forward direction
1 Channle or 2 Channels are available to Choose
And you can read from App for each Channel
- Real-time total power of 2 channels of reverse and forward direction
- Power for Channel A and B Separately(W)
- Current(mA)
- Voltage(V),
- Power factor, and Frequency(Hz)
Electricity Statistic for each channel in Forward and Reverse direction.
Hourly Elec. (KWh)
Daily Elec. (KWh),
Monthly Elec. (KWh)
-Yearly Elec. (KWh)
Technical data:
Rated Voltage:100-240V AC 50/60Hz
Measurable Current Range: 0.2A-80A
Protocal: ZigBee
WiFi Frequency: 2.4GHZ (Not Support 5Ghz)
Ambient Temperature Range:-10°C ~ 55°C
Electricity Statistic Channel A , B Separately and Total daily monthly, yearly Reverse and Forward Direction
Automation , It allows to make a Scene for this device working with other tuya devices
Set Automation for the Measured Device ,
For example, If Power or Current Is over the Value, then other tuya device starts to work .
Wiring Diagram
1. To measure the power 'from Grid' and 'To Grid'
Please note to make sure the circuit mesaured is in the same phase as the circuit power to the module.
2. Measure the power consumption.
Please note to make sure the circuit mesaured is in the same phase as the circuit power to the module.
Non-connect to Be Safe, Easy and Safe to Install
No need to change the wires, Just put the wire into the clamp, then it can measure, very easy.
Small Size Module , Easy to Install
We guarantee good quality, every product will be tested before delivery. Not before Order
Q&A
Q : After I configure it with App , why App shows 'shutdown' ?
A : Only if you put a device's wire (either live wire or neutral wire, not both) in the clamp, and turn on the device, then the clamp can sense the current, and App will show it is working
Q : I suppose P= U*I, why the value shows on App is not correct ?
A : Please consider the cos(Φ).
Because As resistances do not produce any phasor difference (phase shift) between voltage and current waveforms, all the useful power is delivered directly to the resistance and converted to heat, light and work. Then the power consumed by a resistance is real power which is fundamentally the circuits average power.
To find the corresponding value of the real power the rms voltage and current values are multiplied by the cosine of the phase angle, Φ as shown.
Real Power P = I2R = V*I*cos(Φ) Watts, (W)
Customer Service
We always response fast, if you have any question, please leave message online, or send email to sophie@matseeplus.com
Thanks.
Best Regards
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
Total items
Product subtotal